Canon Pixma MP520 series Quick Start Manual page 18

2
Prepare to load paper.
(1) Open the Sheet Feeder Cover and pull out the
Paper Support.
Put your finger in the rounded indent of the
Paper Support and pull it out until it stops.
(2) Open the Front Tray.
Put your finger in the indent on the top of the
Front Tray and open it gently.
(3) Extend the Output Paper Support.
(4) Press the Paper Feed Switch so that the
Rear Tray lamp (A) lights.
Note
You can also select the paper source with the printer
driver. For details, refer to the PC Printing Guide on-
screen manual.
3
Load the paper.
(1) Load the paper in the Rear Tray with the print
side facing UP.
(2) Align the paper stack against the Cover Guide
on the right side of the Paper Support.
Note
Make sure that the Cover Guide is set upright
when you load paper in the Rear Tray.
(3) Pinch the Paper Guide and slide it against the
left side of the paper stack.
Important
Do not load higher than the Load Limit Mark
(B).
Do not slide the Paper Guide too hard. Paper
may not be fed properly.
4
Specify the page size and media type settings according to the loaded paper.
Note
When performing copy direct printing without using a computer, select the size and type of the
loaded paper in Page size and Media type in each mode. For details on settings in each menu,
see "Setting Items" on page 21 and page 26.
When using the machine connected to a computer, select the size and type of the loaded paper
in Page Size (or Paper Size) and Media Type in the printer driver.
For details on printer driver settings, see "Printing with Windows" on page 33 or "Printing with
Macintosh" on page 34.
14 Before Using the Machine
(1)
(3) (2)
(B)
(3)
(A)
(4)
(1) (2)