Install The Toner Cartridges - Canon Color imageCLASS 8180c Quick Start Manual

Install the toner cartridges.

1 Close the cartridge cover and lower the
scanning platform. Please wait until the
whirring sound stops.
NOTE
The machine uses a compact carousel configuration
●
for the toner. This means the carousel rotates into a
new position for each toner to be loaded.
2 The LCD alternates between the standby
display and the message to insert toner
cartridges (Y/M/C/K).
Menu Menu
Menu key
Arrow keys
Set Set
3 Press [Menu] on the operation panel.
4 Press or (arrow keys) to select
<10.MAINTENANCE> ➝ press [Set].
5 Press or (arrow keys) to select
<1.CHANGE CARTRIDGE> on the LCD ➝
press [Set].
Set key
- 6 -
6 Press or (arrow keys) to select <5.ALL
COLORS> on the LCD ➝ press [Set].
NOTE
If you replace an individual color, select either
●
YELLOW, CYAN, MAGENTA
ALL COLORS and press [Set].
If you select <5. ALL COLORS>, change the
●
cartridge one by one instead of removing
all cartridges.
7 Lift the scanning platform
cartridge cover until it is locked
whirring sound stops.
8 Check the color marking on the cartridge
receptacle in the machine. Remove the toner
cartridge of the same color from the bag.
Keep the back for future use.
NOTE
If the cartridge cover is closed during those
●
steps or the spent toner cartridge is not in
the replacement position, close the cover,
then open it again when the whirring
sound stops. Repeat this process until the
cartridge you want to replace is in the
correct position.
or BLACK instead of
➊
and open the
➋
when the