Canon VIXIA HF11 Instruction Manual page 106

Additional Information
CANNOT RECORD ON THIS CARD USING MXP/FXP MODE
- Movies cannot be recorded in MXP or FXP mode on a memory card if it is rated Speed Class 2. Select a
different recording mode (
CANNOT RECORD CANNOT ACCESS THE BUILT-IN MEMORY
- There is a problem with the built-in memory.
CANNOT RECORD CHECK THE CARD
- There is a problem with the memory card.
CARD FULL
- The memory card is full. Erase some recordings to free some space or replace the memory card.
CARD REACHED THE MAXIMUM NUMBER OF SCENES
- The memory card already contains the maximum number of scenes; no further scenes can be copied onto the
memory card. Delete some scenes (
CARD UNABLE TO RECOGNIZE THE DATA
- The memory card contains scenes recorded in a different television system (PAL or SECAM).
CHANGE THE BATTERY PACK
- Battery pack is exhausted. Replace or charge the battery pack (
CHECK THE CARD
- Cannot access the memory card. Check the memory card and make sure it is inserted correctly (
- A memory card error occurred. The camcorder cannot record or display the image.
- A MultiMedia Card was inserted into a camcorder. Insert a compatible SD/SDHC memory card.
- If after the message disappears,
remove and reinsert the memory card. If
- Initialize the memory card (
CONNECT THE COMPACT POWER ADAPTER
- When the camcorder is in
camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder.
COULD NOT ADD TO PLAYLIST
- Scene could not be added to the playlist (
scenes recorded in MXP or FXP mode are also added to the playlist, the maximum number of scenes in the
playlist may be less than 999. Delete some scenes (
DATA INCLUDES MXP/FXP SCENES CANNOT COPY TO THIS CARD
- Movies recorded in MXP or FXP mode cannot be copied onto a memory card if it is rated Speed Class 2.
Replace the memory card with one rated Speed Class 4 or higher.
ERROR WRITING THE CARD DATA MAY BE RECOVERED IF CARD WAS NOT REMOVED RECOVER FILES?
- If power supply was accidentally interrupted while the camcorder was writing to the memory card, this
message will appear the next time you turn on the camcorder. Select [YES] to try to recover the recordings. If
you removed the memory card and used it with another device after this happened, we recommend you
select [NO].
INITIALIZE USING ONLY THE CAMCORDER
- There is a problem with the file system that prevents accessing the selected memory. Initialize the built-in
memory or memory card with this camcorder (
106
36) or replace the memory card with one rated Speed Class 4 or higher.
43).
appears in red, perform the following: Turn off the camcorder and
turns back to green you can resume recording/playback.
33). (Doing so will erase all the still images on the memory card.)
mode and is connected to the computer, this message will appear if the
59). The playlist cannot contain more than 999 scenes. If
43).
33).
20).
32).