Nakamichi Sonic Cutter ZERO Quick Start Manual

Operation Guide
See attached operation manual
for details.
DOWN key
Reduce
the power level.
Main power switch
1
Power ON:
Press [Main power switch]
The LED on the control panel lights up.
2
Power level adjustment:
Displays the power level.
(Can be adjusted during usage)
3
Startup:
Press [ON / OFF key] or use the foot switch
The ON / OFF key and the LED on the handpiece light up when starting up.
When using the optional foot switch
• Factory default setting: Pressing the foot switch to start and releasing it to stop.
• The setting can be changed to pressing the foot switch to start and pressing it again to stop. See attached
operation manual to check how to change the setting.
If it is activated by a foot switch, it can only be stopped by a foot switch. See the other side for instructions on connecting.
Ultrasonic Cutter
Press [DOWN key] or [UP key]
DOWN key
700 Shimohinata, Kanuma, Tochigi 322 - 8666, Japan TEL: +81 289 64 3520 FAX: +81 289 62 1135
UP key
Increase
the power level.
ON / OFF key
Start and stop
the handpiece.
UP key
PR-K359E Ver.1 2022-05-31 00.N