Using The Scanner; Documents; Document Types - Canon imageFORMULA CR-25 Startup Startup Manual

Using the Scanner

Documents

Document Types

This scanner can scan documents of the following sizes:
Length
Height: 2.0" to 4.2" (50 mm to 106 mm)
Length: 3.2" to 9.0" (80 mm to 228 mm)
Thickness: 0.003" to 0.008" (0.08 mm to 0.20 mm)
0.004" to 0.005" (0.10 mm to 0.14 mm) with Double Feed
Detection enabled
Weight: 17 to 40 lb bond (64 to 157 g/m
20 to 28 lb Bond (81 to 105 g/m
enabled
IMPORTANT
A document must meet the following criteria to be scannable:
• Always make sure that the ink on a document is dry before scanning it.
Scanning documents before the ink is dry can make the scanning glass
and rollers dirty, resulting in lines on images.
• Always clean the rollers after scanning a document written in pencil.
Scanning documents that are written in pencil or similar material can
make the rollers dirty, which can then transfer the dirt to subsequent
documents.
• When scanning a two-sided document that is printed on thin paper, the
image on the opposite side of each page may show through. Adjust the
scanning intensity in the application software before scanning the
document.
• Exercise caution when scanning perforated documents. Documents with a
ragged edge along the perforation may jam and become damaged.
• Exercise caution when scanning documents with a glossy finish or
colored background, since they may be misdetected as double fed
documents. If misdetection of double feeds occurs often, turn off Double
Feed Detection. (See p. 46).
36
Using the Scanner
Height
2
)
2
) with Double Feed Detection