2
Click [Install the SCSI driver].
Installation of the SCSI driver will commence.
3
Follow the instructions in the window to complete
the installation.
A message instructing you to close the CanoScan Setup Utility and
turn off the computer will display after the installation has finished.
4
Close the CanoScan Setup Utility and remove the
CD-ROM from the drive.
• Handle the CD-ROM with care, placing it in a case for safe-keeping.
5
Shut down the computer.
• Windows NT 4.0: confirm the status of the SCSI card. For
instructions, read Confirming the Status of the SCSI Card with
Windows NT 4.0. on the next page.
WARNING
• If you are using the supplied SCSI card with Windows 95 or
Windows NT 4.0, ensure that you install the driver software
from the CanoScan Setup Utility CD-ROM. The standard
Windows driver installed from the system disk may not
operate correctly with the supplied SCSI card.
14
FB1200S Getting Started
Windows
Macintosh