Related Manuals for Sylvania SKCR2826BT
Summary of Contents for Sylvania SKCR2826BT
- Page 1 MODEL NO. SKCR2826BT UNDER CABINET UNIVESAL BLUETOOTH MUSIC SYSTEM INSTRUCTION MANUAL PLEASE READ BEFORE USING THIS UNIT Sylvania Inc. used under licenseSYLVANIA is a registered trademark of OSRAM .
- Page 2 Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the unit, is Do not mix old and new batteries. intended to alert the user to the presence of uninsulated Do not mix alkaline, standard (carbon-zinc), or “dangerous voltage”...
- Page 3 Important Safety Instructions 1. Read Instructions - All the safety and feature. If you are unable to insert the plug receptacles as this can result in a risk of fire or electric shock. operating instruction should be read before the fully into the outlet, try reversing the plug.
-
Page 4: Location Of Controls
LOCATION OF CONTROLS... -
Page 5: Lcd Display
POWER button 2. VOLUME button VOLUME + button 4. TIMER button 5. SOURCE button 6. PAIR button PLAY/PAUSE/SCAN button 8. CLOCK SET PREST button HOUR / TUNE- Backward - button MIN / TUNE + Forward + button 11. LCD DISPLAY 12. -
Page 6: Power Source
POWER SOURCE AC POWER This product operates on 120V~ 60Hz power supply. To power the unit, plug the built-in AC Power cord into a standard wall outlet. BATTERY BACKUP Requires 2, AAA-size, batteries (not included).The battery backup is intended for short power outages only. -
Page 7: Setting The Clock
SKCR2826BT (see your device’s instructions to add or setup a Bluetooth device). 4. Select SKCR2826BT from the device list when it appears on you device screen. If required, enter the pass code “0000” to pair (link) SKCR2826BT with your device. -
Page 8: Playing From A Bluetooth Device
1. Your Bluetooth enabled device will not play the music through the speaker, even if connected (linked), if the device does not support A2DP profile. 2. Remember to turn off the SKCR2826BT when you have finished listening, s et button to the STANDBY mode. -
Page 9: Listening To The Radio
LISTENING TO THE RADIO An FM antenna is built into the unit. To improve FM radio reception, adjust the position of the unit. 1. Press the button to turn the unit ON. 2. Press the SOURCE button to select FM band, the FM frequency will show on LCD display. -
Page 10: Care And Maintenance
NOTE: If you connect this unit to the Line-Out Jack of your external device then you only need to adjust the volume control of this unit. If you connected the Headphone Jack of your external device then you may need to adjust both the volume control of your external device and the volume control of this unit to find the most desirable volume setting. -
Page 11: Limited Product Warranty
LIMITED PRODUCT WARRANTY This quality product is warranted to be free from manufacturer’s defects in material and workman-ship, provided that the unit is used under the normal operating conditions intended by the manufacturer. Should you have any problem with this product, please and it is highly recommended to visit our website at www.curtisint.com before you take any other steps as we have additional copies of instruction manuals, operating manuals and trouble shooting tips on our website which gives you the answer on most of the questions you could have in operating the unit.