Canon PIXMA MP620 Series Getting Started page 9

3
In stall the I nk Tank
Press the PUSH mark on the ink
tank until it clicks into place.
Make sure the Ink lamp lights red.
• Be sure to install it in a well-lit
environment.
• Match the labels when installing.
4
Install all the other ink tanks in the
same way.
Install all the ink tanks.
• Once you have installed the ink tanks,
do not remove them unnecessarily.
• Make sure all the Ink lamp lights red.
5
(B)
Close the Scanning Unit (Cover) (B).
• Wait until the screen above appears (about 4
minutes) and go to the next step.
• The machine may make some operating noises
when preparing to print. This is normal operation.
• If an error message is displayed on the LCD, make
sure that the Print Head and the ink tanks are correctly
installed.