Playing Back A Cassette - Canon ZR Instruction Manual

Playing back a Cassette

OPEN
CLOSE
You can use the LCD screen for instant, on-the-spot playback. The camera also
plays back the sound track via the built-in speaker (p. 20).
Operate basic playback functions from the multi-switch on the top left of the
camera.
To play back your recordings on a TV, see p. 22.
To use the wireless controller, see p. 31.
Note:
• To avoid accidental recording, make sure that you slide the tab on the cassette
so that it exposes the hole (the switch position is usually labelled SAVE or
ERASE OFF).
1. Attach a power source, press down and slide the POWER switch to
VCR.
2. Load the cassette.
3. Press down the e (play) side of the multi-switch to start playback.
• To end playback, press down the 3 (stop) side of the multi-switch.
• To wind the tape forwards, stop playback and turn the multi-switch lever
away from the lens.
• To wind the tape backwards, stop playback and turn the multi-switch lever
towards the lens.
• If the playback picture is rough (mosaic-like noise), clean the video heads
using a Canon DVM-CL Digital Video Head Cleaning Cassette or a
commercially available digital video head cleaning cassette.
E
OFF VCR POWER
19