24 port gigabit layer 2 managed poe switch (15 pages)
Summary of Contents for Genie CAP-REX-1G
Page 1
Contactless Request To Exit Button CAP-REX-1G Quick Start Guide Please read these instructions carefully before operating the unit and keep for further reference.
The Genie CAP-REX-1G is a sleek contactless request to exit button and works using capacitive technology. It has a blue LED back light which turns green on activation. The CAP-REX-1G is 1G in size making it perfect for most access control applications.
Page 3
Quick Start Guide Contactless Request To Exit Button 4. PCB Setting Diagram For door open duration setting from 1 to 15 sec. 5. Wiring Label Description +VDD Power input (+12V ~ +24VDC) RTE_COM RTE_NO Exit button output (dry contact) RTE_NC External device to trigger the door open, active low Signal ground (0 VDC)
Quick Start Guide Contactless Request To Exit Button 6. Functions • As you put your hand near the exit button the capacitive technology will trigger the device without the need to actually touch it. The colour of the exit button will change from blue to green in colour when triggered. At the same time, the relay inside the exit button device will trigger for 1 second and the built-in buzzer will beep once.
Page 5
Quick Start Guide Contactless Request To Exit Button 8. Installation 1. Confirm the size of back box fits CAP REX-1G as shown in 3. Product Dimensions. 2. Confirm all wiring is correct. Set the jumpers to the required positions. 3. Secure the exit button to the back box with correct screws as shown below. 4.