Canon VIXIA HF M301 Instruction Manual page 137

4 Touch [a] to open the scene selection screen.
When you convert scenes from the [Playlist] index screen (including the
playlist of video snapshot scenes), you cannot select individual scenes;
instead, the entire playlist will be converted. Skip directly to step 6.
5 Touch on the individual scenes you want to convert.
• A checkmark O will appear on scenes selected. Touch a selected
scene again to remove the checkmark.
• To select all the scenes at once: Touch [Select All] instead of
touching individual scenes. (Remove in advance any checkmarks
from scenes you may have selected individually.)
6 Press Z and touch [Yes].
• If a copyright notice appears, read it
carefully and touch [OK] if you agree.
• Before touching [Yes], you can touch
[5] to change the conversion
settings as described below.
• Touch [B] to interrupt the operation
while it is in progress.
7 When the conversion is completed,
a confirmation screen will appear.
Connect the camcorder to the
computer at this point (0 138) to continue uploading the converted
videos to the Web or touch [End Without Connecting] to connect to the
computer later.
To embed the recording date and time
The recording date and time will always be displayed on the converted
scene.
8
[5] [Embed Date/Time]
To select the bit rate
Using a higher bit rate will result in better video quality for the con-
verted scenes, while a lower bit rate will result in smaller file sizes and
faster uploads.
8 8
[On] [f]
External Connections
8
[f]

137