Canon VIXIA HF M52 Instruction Manual page 216

Number of scenes already at maximum
- The maximum number of AVCHD scenes (3,999 scenes) has been reached. Delete some
scenes (A 60) to free some space.
Number of stories already at maximum
- The gallery already contains the maximum number of stories (98 stories in any one given
memory). Delete some stories (A 63) or change the recording memory for movies (A 40).
Recording program: Underwater / Surface
Turn on the camcorder while holding the zoom lever toward T or W to change the recording
b
program š Ÿ.
- Follow the instructions to switch the recording program between [Underwater] and [Surface]
while the camcorder is secured inside the optional WP-V4 Waterproof Case.
Recording was stopped due to insufficient write speed of the memory card
- The data transfer rate was too high for the memory card in use and the recording was
stopped. Replace the memory card with one rated SD Speed Class 2, 4, 6 or 10.
- After repeatedly recording, deleting and editing scenes (fragmented memory), it will take
longer to write data on the memory and recording may stop. Save your recordings (A 146)
and initialize the memory (A 41).
Scene recorded using another device. Cannot copy the scene.
- Scenes that were not recorded with this camcorder cannot be copied to the memory card.
- Scenes that were edited using the supplied PIXELA's software (-/, only) or other
software cannot be copied or divided.
Scene recorded using another device. Cannot divide the scene.
- Scenes that were not recorded with this camcorder cannot be divided with this camcorder.
- Scenes that were edited using the supplied PIXELA's software (-/, only) or other
software cannot be copied or divided.
Scene recorded using another device. Cannot play back the scene.
- Scenes that were not recorded with this camcorder cannot be played back.
Select the desired scene number
- A number of scenes have the same recording date but different file control information. This
can occur for example when you edit movies and write the files back to the camcorder. Select
a number to display the corresponding group of scenes.
-/, Some scenes could not be converted
- Some scenes selected for conversion to SD were recorded using another device. These
scenes were not converted.
- Among the scenes selected for conversion to SD there are scenes recorded with another
device using 24p frame rate. When converting scenes to SD, leave out scenes recorded using
another devices.
Some scenes could not be deleted
- Movies that were protected/edited with other devices cannot be deleted with this camcorder.
216
Additional Information