Table of Contents
Advertisement
[Notification Sounds]:
ing on the camcorder, the self-timer countdown, etc.
• Set this to [j Off] to turn off notification sounds.
• While pre-recording (A 98) is activated, the camcorder will not emit
any notification sounds.
[Custom Control Button]:
control button that is a shortcut to one of the functions in the [
Functions] panel is constantly displayed. By changing this setting, you can
change the shortcut, which will allow you to access one of your frequently
used functions quickly and conveniently.
• In
mode, the default setting is [Ò Decoration]. In other modes, it
is [È Powered IS].
[Autostart Decoration]:
open automatically when you stow the LCD panel with the LCD screen
facing out.
[Power Saving Mode]:
tings.
[Auto Power Off]: In order to save power when the camcorder is powered
by a battery pack, it will automatically shut off if left without any operation
for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, [Auto Power
Off] will appear. Operating any of the camcorder's controls while the
message is displayed will prevent the camcorder from shutting off.
• In standby mode, the camcorder will shut off after the time selected for
the [Quick Start (Standby)] setting.
[Quick Start (Standby)]: Select whether to activate the Quick Start function
(A 51) when you close the LCD panel in a recording mode and the
length of time after which the camcorder will end the standby mode and
shut off automatically.
• You can set Quick Start to [Off], for example, if the camcorder is set on
a fixed position and you want to keep recording video with the LCD
panel closed in order to conserve the battery's power.
[Battery Info]:
When you are using an optional battery pack that is com-
patible with Intelligent System, this option displays a screen where you
can verify the battery charge (as a percentage) and the remaining record-
ing time (
,
[Control for HDMI]:
trol) function. When you connect the camcorder to an HDTV compatible
with HDMI-CEC using the supplied HDMI cable, you can control the cam-
corder's playback using the remote control of the TV.
180
Additional Information
A beep will accompany some operations like turn-
On the lower right of the recording screen, a
When set to [i On], the decoration screen will
Controls the camcorder's automatic power off set-
mode) or playback time (
Activates the HDMI-CEC (Consumer Electronics Con-
Main
,
mode).
Advertisement
Table of Contents
