Table of Contents
Advertisement
Antenna Connection
- Be careful for the bronze wire not to be bended in connecting to antenna input port.
Apartments
(connecting to wall antenna socket)
wall antenna socket
TE
RS-232C INPUT
DVI INPUT
AUDIO INPUT
(CONTROL/SERVICE)
OL
VHF antenna
UHF antenna
outdoor antenna
Private house
(connecting to wall outdoor antenna)
Watching VCR
- When connecting the set to external equipment, match the colours of connecting ports (Video - yellow, Audio (L) - white, Audio
(R) -red).
- Connect the VIDEO INPUT socket (yellow) to the VIDEO INPUT on the set.
- If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/MONO) input on the set.
- If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR
to the Video input.
Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.
- Use the orbiter function to Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still pic-
ture from a VCR. (Refer to p. 25)
If a 4:3 picture format is used; the fixed image may remain visible on the screen.
- To avoid picture noise (interference), leave an adequate distance between the VCR and set.
Watching TV programmes
- Turn the set on and select the programme you
want.
Watching VCR
1. Use the TV/AV button on the remote control to
select
,
,
,
AV1
AV2
AV3
- If both S-VIDEO and VIDEO sockets have been
connected to the S-VHS VCR simultaneously, only
the S-VIDEO can be received.
2. Insert a video tape into the VCR and press the
PLAY button on the VCR.
(See VCR owner's manual)
COMPONENT
Y
P
B
RGB INPUT
S-VIDEO
RF coaxial wire (75 ohms)
or
.
AV4
AV5
AUDIO
P
L
R
R
AV1
Antenna
L
R
(MONO)
VIDEO
AUDIO
AV4
- 7 -
AV2
AV3
AC INPUT
< Back panel of the set >
< Back panel of the set >
< VCR >
Advertisement
Table of Contents
