Table of Contents
Advertisement
Indexer Adjustment Instructions
In some cases indexer adjustment may be required. If required simply complete the
following instructions to achieve proper indexer adjustment.
Only perform the indexer adjustment procedure when the hose is pulled
out to the base layer. If there are spaces in the base layer you will be
required to tighten the coils so that they form a neatly packed spool.
Rotate the drum if necessary. In some cases the indexer may not be out of
adjustment and will not require any adjustments. If the indexer is still out
of alignment continue with the instructions below.
Step 1
Disconnect the battery and ensure all mechanical tension has been released from
the hose rewind system. Then remove the indexer chain guard.
Figure 40 - Remove Chain Guard
Step 2
Remove the chain connector link, and then remove indexer chain.
Figure 41 - Remove Indexer Chain
Cadman Power Equipment ▪ BOX 100, Courtland, Ontario, Canada N0J-1E0 ▪ Phone: 519-688-2222 ▪ Fax: 519-688-2100 ▪ www.cadmanpower.com
Operator's Manual - Mini-Travellers
TR-MAN-1500
img-00724
img-00725
Page 73 of 83
Advertisement
Chapters
Table of Contents
