Steamout - Philips 4000 Service Manual

PHILIPS 4000 and 3000

5.1.1. SteamOut

This document describes the Steam-Out procedure; the application is used in order to empty the
heater.
To enter in SteamOut
The machine enters in Steam-Out mode by holding pressed together:
the "ESPRESSO LUNGO" button and the MENU button;
while switching on the machine by main switch behind the machine.
Once entered the Steam Out mode the display shows the "STEAM
OUT" indication. Buttons can be released
IMPORTANT NOTE: to execute the Steam-out procedure the Ntc
sensor must work correctly; if some errors occurs on Ntc during the
steam-out, the procedure can't continue and an error message is
shown on the display.
IMPORTANT NOTE: to execute the Steam-Out procedure the
DREGDRAWER must be in place and the DOOR must be closed.
If these 2 conditions are not respected a warning message is shown
on the display and the Steam-Out is interrupted
The machine starts the Steam Out and the display change the
backlight (yellow) and appears the indication "ON".
While the Steam Out runs the Electro valve is opened and water
comes out the Water/Steam pipe.
When the Steam Out is complete the message "COMPLETE" is
shown on the Display.The Electro valves automatically closes and the
machine can be switched off.
05 SERVICE MODE
8/18