Working With The Multibay - HP Compaq d530 USDT Getting Started Manual

Getting Started

Working with the MultiBay

Ä
4
To turn off power to the computer, press and hold the power button
for four seconds. However, manually turning off the power bypasses
the standby state and can result in loss of data.
To reconfigure the power button to work in On/Off mode, run
Computer Setup. Refer to the Computer Setup Guide on the
Documentation Library CD for more information about using the
Computer Setup utility.
The MultiBay is a special drive bay that supports a variety of optional
12.7-mm removable drives, including:
■
MultiBay CD-ROM Drive
■
MultiBay CD-RW Drive
■
MultiBay DVD-ROM Drive with Software MPEG-2
■
MultiBay CD-RW/DVD-ROM Combo Drive
■
MultiBay 1.44-MB Diskette Drive
■
MultiBay SMART Hard Drive
CAUTION: To prevent loss of work and damage to the computer or a drive:
■
Before handling a drive, ensure that you are discharged of static
electricity. While handling a drive, avoid touching the connector.
■
Before traveling with, shipping, storing, or removing a drive other than
a hard drive, make sure that no media, such as a diskette, CD-ROM,
or DVD-ROM, is in the drive and that the media tray is closed.
■
Handle a drive carefully: do not use excessive force when inserting it,
do not drop it, and do not press on the top cover.
■
Avoid exposing a hard drive to liquids, temperature extremes, or
products that have magnetic fields such as monitors or speakers.
■
If a drive must be mailed, place the drive in a bubble-pack mailer or
other suitable protective packaging and label the package "Fragile:
Handle with Care."
www.hp.com