Removing A Drive From The Multibay - HP Compaq d530 MT Hardware Reference Manual

Hardware Upgrades

Removing a Drive from the MultiBay

2–34
1. Exit all software applications, turn off the computer properly
through the operating system, then turn off any external devices.
2. Remove the MultiBay security screw, if it has been installed.
Refer to the "Uninstalling the MultiBay Security Screw"
for instructions on removing the MultiBay security screw.
3. Slide the eject lever 1 to the left to eject the drive from the
MultiBay 2.
Removing a Drive from the MultiBay
www.hp.com
section
Hardware Reference Guide