Table of Contents
Advertisement
Before Operation
5.1 Speaker Setup
Make the following settings for the built-in 5.1 channel
surround decoder.
1. Press ENTER, and the 5.1 Speaker Setup menu
appears.
2. Use
/
to select the desired speaker.
3. Adjust options using
/
4. Press ENTER to confirm your selection. Returns to
the previous menu.
Speaker selection
Select a speaker that you want to adjust. [Front speaker
(Front L), Front speaker (Front R), Center Speaker
(Center), Subwoofer (SubWoofer), Rear speaker (Rear
L), Rear speaker (Rear R)]
Note:
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Size
Since the speaker settings are fixed, you cannot
change the settings.
Volume
Press
/
to adjust the output level of the selected
speaker. (-5dB ~ 5dB)
Distance
If you connected speakers to your DVD/CD unit setting
the Distance lets the speakers know how far the sound
has to travel to reach your set listening point. This
allows the sound from each speaker to reach the listen-
er at the same time.
Press
/
to adjust the Distance of the selected
speaker. (You can't adjust front / Woofer speakers)
Test
Press
/
to test the signals of each speaker. Adjust
the volume to match the volume of test signals memo-
rized in the system.
Front Left (Front L) → Center → Front Right (Front R)
→ Rear Right (Rear R) → Rear Left (Rear L) →
SubWoofer
LOCK (Parental Control)
Rating
Blocks playback of rated DVDs based on their contents.
Not all discs are rated.
1 Select "Rating" on the LOCK menu then press
2 To access the LOCK options, you must input the
/
/
buttons.
password you have created. If you have not yet
entered password, you are prompted to do so.
Input a password and press SELECT/ENTER. Enter
it again and press SELECT/ENTER. to verify. If you
make a mistake before pressing SELECT/ENTER,
press CLEAR.
3 Select a rating from 1 to 8 using the
4 Press SELECT/ENTER to confirm your rating selec-
tion, then press SETUP to exit the menu.
Password
You can enter or change password.
1 Select Password on the LOCK menu and then press
2 Follow the step 2 as shown above (Rating).
To change the password, press SELECT/ENTER
when the "Change" option is highlighted. Input a
password and press SELECT/ENTER. Enter it again
and press SELECT/ENTER to verify.
3 Press SETUP to exit the menu.
If you forget your password
If you forget your password, you can clear it using the
following steps:
1 Press SETUP to display the Setup menu.
2 Input the 6-digit number "210499" and press
SELECT/ENTER. The password is cleared.
Rating 1-8: Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
Unlock: If you select unlock, parental control is not
active and the disc plays in full.
.
.
/
buttons.
15
Advertisement
Table of Contents
