Table of Contents
Advertisement
Call functions
Answering a second call
You can answer an incoming call while already on the
phone, if your network supports this function and you
have activated the call waiting feature.
1. Press [
] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. To end the current call, press [
Using In-call options
Press <Options> to access the following options
during a call:
•
Voice clarity on/Voice clarity off: remove
extraneous noise and increase call quality so that
the person with whom you are speaking can hear
you clearly even if you are in a noisy place.
•
Mute/Unmute: switch off the phone's microphone
so that the other person on the phone cannot hear
you, or switch it back on.
28
•
p. 81
•
•
].
•
•
•
Mute keys/Send keys: switch the key tones on
or off.
To communicate with answering machines or
computerized telephone systems, Send keys
must be selected.
Phonebook: access the contact list.
Send DTMF: send the DTMF (Dual tone multi-
frequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialing, sounding
when you press the number keys. This option is
helpful for entering a password or an account
number when you call an automated system, like a
banking service.
Message: send a new message or access received
messages.
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
Advertisement
Table of Contents
