Safety Information For Communications And Multimedia Models; Analog Telephone Line - HP Brio 8000 Supplementary Manual

Important Safety Information

Safety Information for Communications and Multimedia Models

Before connecting the headphones or speakers, always turn the volume
down to avoid discomfort from unexpected noise or static. Listening to
loud sounds for prolonged periods of time may permanently damage
your hearing. Before putting on the headphones, place them around
your neck and turn the volume down. Then, put on the headphones
and slowly increase the volume by using the Audio Mixer Applet or the
enhanced keyboard until you find a comfortable listening level, where
the sound is clear, without being too loud. When you can hear
comfortably and clearly, without distortion, leave the volume control in
that position.
Do not attempt to connect this product to the telephone line
during a lightning storm.
Never install telephone jacks in wet locations unless the telephone line
has been disconnected at the network interface.
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
Avoid using a telephone (other than a cordless type) during a lightning
storm. There may be a risk from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Never touch or remove the communications card without first
removing the connection to the telephone network.

Analog Telephone Line

To use the HP communication card, you must have an analog telephone
line. If you are not sure if you have an analog telephone line or digital
line, have it verified by the person in charge of your telephone system
before you install the modem.
Caution The modem will be damaged if you use a digital telephone line.
English vii