Pioneer CDS-P4000 Service Manual page 43

- How to remove the Load Carriage Motor Assy
1. Unscrew the screw (1 piece).
2. Remove the Load Carriage Motor Assy.
- How to remove the Clamp Arm Assy
1. Unlock springs (3 pieces).
2. Remove the Clamp-Up Lever.
3. Remove the Assy in such way that; you shift the Assy
to the left side direction while you rotate it to the
upper direction slowly.
- How to remove the Spindle Motor
1. Unscrew 2 pieces of screws. Then you can remove
the motor.
Clamp-Up Lever
Spring
CDS-P4000
Load Carriage
Motor Assy
Grease Application
Clamp Arm Assy
Spring
Spring
Spindle Motor
43