Specification - LG 42LD650 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LCD TV used LD03B
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature: 25 ºC ± 5 ºC(77 ºF ± 9 ºF), CST: 40 ºC ± 5 ºC
2) Relative Humidity : 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-240 V~ 50 / 60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
4. Module optical specification
No. Item
1. Viewing Angle<CR>10>
2. Luminance
3. Contrast Ratio
4. CIE Color Coordinates
1) Standard Test Condition (The unit has been 'ON')
2) Stable for approximately 60 minutes in a dark environment at 25 ºC.
3) The values specified are at approximate distance 50 cm from the LCD surface.
Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

Specification
Right/Left/Up/Down 89/89/89/89
Luminance (cd/m )
2
Variation
CR
White Wx
Wy
RED Xr
Yr
Green Xg
Yg
Blue Xb
Yb
- 4 -
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety : CE, IEC specification
- EMC :CE, IEC
Min. Typ.
400 500
1100 1500
0.279
0.292
0.636
Typ. 0.335
-0.03 0.291
0.603
0.146
0.061
Max. Remark
CR > 10
1.3 MAX /MIN
Typ.
+0.03
LGE Internal Use Only