Scrdiff (1M) - HP b2600 User Reference

SCR Reference (man Pages)
scrdiff (1M) - DESCRIPTION

scrdiff (1M)

NAME
scrdiff – list differences between data in SCR configuration snapshots
SYNOPSIS
/opt/scr/bin/scrdiff [-a] [-f
filter ]
base_node:base_time
target_node:target_time
DESCRIPTION
scrdiff lists configuration snapshot differences between two nodes at
two times: base_node configuration at base_time and target_node
configuration at target_time , or in one node at two times. base_node
and target_node are hostnames. base_time and target_time are
specified by the format YYYYMMDD [ hh [ mm ]], or by tag name (latest,
oldest, or user defined tag name). (See scrtag (1M)). If hour and
minute are not specified, the default is 2359. If minute is not specified,
the default is 59. If a configuration snapshot is not registered at the
specified time, the snapshot effective at the time is displayed instead.
Options
-a
-f filter
Formats
Output message format is as follows:
50
All components, groups, and attributes are listed
whether or not differences exist. An asterisk (*) at the
beginning of a line indicates that a difference exists
between base_time and target_time . If the
information has not been modified, a space character is
displayed.
Specified filter name is applied to limit the report. See
scrfilter (1M) for filter customization.
[BASE] base_node : MM/DD/YYYY hh:mm tz ( tag_name )
[TARGET] target_node : MM/DD/YYYY hh:mm tz ( tag_name )
Filter " filter_name " applied.
COMPONENT NAME
GROUP NAME
BASE TARGET
Reference