Table of Contents
Advertisement
WARNING: This operation will reset all switch configuration data and
non-volatile settings to factory default values. All optional features will also be
disabled. The switch must be offline to continue.
NOTE: If you have enabled features that add additional port function since the switch was
shipped from the factory, these features will be disabled (factory default) when the configuration
is reset. Only those ports that were enabled at the factory will function. You will have to enable
the additional port function features again through the
NOTE: Factory-default values may vary, depending on the firmware release installed in your
switch. For a list of values, refer to the hp StorageWorks edge switch 2/16 service manual
(A7284-96002/AA-RS2JA-TE).
edge switch 2/16 product manager user guide
Using Maintenance Features
Configure Feature Key
dialog box.
5–9
Advertisement
Table of Contents
