Epson WF-C8690 User Manual page 376

LCD screen message
Paper out in XX. Load Paper. Paper
Size: XX/Paper Type: XX
Too many paper cassette units are
installed. Turn the power off and
uninstall the extra units. See your
documentation for details.
Unsupported Paper Cassette Units
have been installed. Turn the power
off and uninstall. For details, see
your documentation.
Cannot print because XX is out of
order. You can print from another
cassette.
Maintenance Roller in XX is nearing
the end of its service life.
Maintenance Roller in XX is at the
end of its service life. Replace it and
reset the maintenance roller counter.
You need to replace Ink Cartridge(s). Replace the indicated ink cartridges.
The time for maintenance is
approaching. Contact Epson
Support.
This printer may need service to
keep print quality. Contact Epson
Support.
Paper Setup Auto Display is set to
Off. Some features may not be
available. For details, see your
documentation.
Condition/solution
Load the size and type of paper in the paper source indicated.
You can install up to three optional paper cassette units.
Remove any extra units.
Unsupported optional paper cassette units are installed.
Remove the unsupported units.
Turn the product off and then back on again. Reinsert the
indicated paper cassette. If the error persists, contact Epson for
support.
The maintenance rollers need to be replaced periodically for
optimal performance. (Paper may not feed correctly from the
paper cassette or rear paper feed when a maintenance roller is
near the end of its service life.)
Replace the maintenance rollers and reset the maintenance
roller counter for the paper cassette for which you replaced the
maintenance rollers.
Do not attempt to perform maintenance on your own. Contact
Epson for support.
Do not attempt to perform maintenance on your own. Contact
Epson for support.
AirPrint is not available when the Paper Setup Auto Display
setting is disabled. Set the Paper Setup Auto Display setting to
On.
376