Image - Optoma E1P2A2F6E1Z1 User Manual

Image

The Image menu allows you to modify various image settings, such as 3D related,
format, zoom, color temperature, color space, and others.
3D: Turn the 3D function on or off.
3D Sync. Invert: Turn the 3D sync. inverter option on or off.
Note:
- 3D/3D Sync. Invert cannot be changed when you select image settings.
- In 3D mode, the maximum supported input timing is 1024x768 @ 120Hz.
Format: Select the format to adjust how the image appears. Options are:
Auto: Maintain the aspect ratio of the image projector according to the input
y
source.
4:3: The input source scales to fit the screen and projects a 4:3 image.
y
16:9: The input source scales to fit the screen and projects a 16:9 image.
y
16:10: The input source scales to fit the screen and projects a 16:10 image.
y
Zoom: Zoom in or zoom out the image. Options are: 50%, 75%, 100%, 125%, 150%,
175%, or 200%.
Color Temperature: Select the color temperature. Options are: Warm, Medium, and
Cold.
Note:
The Color Temperature function is not supported in Bright, Eco, and 3D modes.
Color Space: Select an appropriate color matrix type. Options are: Auto, RGB, and
YUV.
Note:
The Color Space function is supported only in HDMI mode.
Frequency: Change the display data clock frequency to match the frequency of your
computer's graphics card. If you see a vertical flickering wave, use the Frequency
control to minimize the bars. This is a coarse adjustment.
Note:
The Frequency can be adjusted only in VGA mode.
Image
3D
3D Sync. Invert
Format
Zoom
Color Temperature
Color Space
Frequency
Phase
Select Exit
On
Off
Auto
Warm
Auto
Enter
25
English