Table of Contents
Advertisement
3-1. Running on Battery
Notebook PC runs on AC power or battery. This section describes the procedure that the user should
take initially for a new system. The provided AC adapter can be used from 100 V to 240 V.
Charge the new battery with the AC adapter before use.
Refer to [Charging Battery with AC Adapter] in User Guide.
1. Turn the machine over to see the battery pack chamber and equip the pack.
Insert the battery pack into the chamber as shown in the following figure and push it in the direction of the arrow
until you hear a clicking sound.
2. Open the machine and turn the power on.
3. Check the battery state.
When the battery status lamp is blinking, charge it fully with the AC adapter before using it.
30
Using the system
Advertisement
Table of Contents
