Acer VG281K User Manual page 21

Selecting the input
Open the Input control and
press the joystick to exit current page and store.
Input
Input
HDMI 1
Auto Source
On
Move OK
Main menu
1. Press the MENU key to open the OSD.
2. Toggle the joystick
toggle to the right to navigate to the element you wish to adjust and press the joystick
to enter it.
3. Toggle the joystick
Information Hot Key
Modes Hot Key
Exit Hot Key : To exit current page and store.
X
Picture
Mode - User
Picture
Brightness
Color Contrast
Black Boost
Audio
Gaming Low Blue Light
OSD
ACM
HDR
System
Super Sharpness
Save Settings to...
Move
Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Picture from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Low
Blue Light, ACM, HDR, Super Sharpness.
5. Brightness: Adjust the brightness from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Adjusts the balance between light and dark shades.
select HDMI1, HDMI2,
Exit
to the up or down
or right
to the left
: Show Monitor Information and Reset control function.
: To change Modes Hot Key menu.
80
50
9
Standard
Off
Off
Off
DP or Auto Source. When you are done,
to select Picture from the OSD. The
to adjust the sliding scales.
X