Table of Contents
Advertisement
x
Troubleshooting
If you find any problem while viewing your TV, you can either use the Reset
function or check the Troubleshooting guide below. If the problem persists,
contact your Sony dealer.
RESET
RESET
Troubleshooting guide
Symptom
Snowy picture
• The connection is loose
• The antenna setup is
Noisy sound
• Channel presetting is
• Signal transmission is
Distorted picture
• Broadcast signals are
Noisy sound
Good picture
• The TV system setting
Noisy sound
24
Additional Information
Reset function
Press the RESET button on your remote control.
Your TV will go blank for a few seconds
then the "Initial Setup" menu will appear.
TV
Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.
Possible cause
or the cable is
damaged.
inappropriate.
inappropriate or
incomplete.
low.
too strong.
is inappropriate.
Solutions
• Check the antenna cable and connection
on the TV, VCR and at the wall.
• Check the antenna setup.
Contact a Sony dealer for advice.
• Display the "Channel Setup" menu and
select "Manual Program" to preset the
channel again.
• Try using a booster.
• Turn off or disconnect the booster if it is in
use.
• Display the "Channel Setup" menu and
select the appropriate "TV System".
Page
22
–
20
–
–
20
Advertisement
Chapters
Table of Contents
Troubleshooting
