View And Deleting Files - Stealth Cam STC-G45NGMAX Instruction Manual

VIEW & DELETING IMAGES
The camera allows for two (2) ways to view your images. First is the direct connection for the
camera to the computer via a USB cable (not included). This is a USB mini to standard USB (type
A/B) cable. By simply turning the unit to the OFF position, and plugging the USB mini end into the
camera and the standard USB end into the computer, the computer will register the camera as a
card reading device. Once connection with the computer has been established the files may be
review based upon the software installed on the computer. Please refer to the software's
Owner's Manual for exact viewing of images.
NOTE: Support for this operation is limited to but not exclusive to the Windows Vista operating
system and above, and also the Mac OS 10.6 and above. Any operating systems below the
above-­‐mentioned are not guaranteed to be compatible and may result in system errors.
The second option is to remove the SD memory card from the camera, and using a card reading
device to view the images. Please refer to the Owner's Manual for the particular device in use for
viewing the files.
NOTE: SD memory card viewers not manufactured by Stealth Cam may create conflicts on the
memory card. Should this occur and the card is no longer working properly with the unit, the
SD memory card will need to be reformatted.
22
www.stealthcam.com Page
877-­‐269-­‐8490