Bluetooth Setting - Sony HDR-AS50R Read This First Manual

(Standard mode)
Note
When set to ON, depending on the physical environment and the distance between the camera and the Live-
View Remote, you may not be able to use the Live-View Remote to turn the camera on/off. In such cases,
operate the Live-View Remote closer to the camera until
Depending on the physical environment and connected device, the communication distance will be changed.
When the Wi-Fi Hi power setting is set to ON, the battery is consumed faster than when set to OFF.
The Wi-Fi icon may not be displayed on the screen immediately after switching the Wi-Fi Hi power setting,
but the icon of the switched setting will be displayed after a moment.
This function cannot be used when the Wi-Fi setting is OFF or when airplane mode is ON.
[52] Changing the Settings

Bluetooth setting

When the camera and corresponding devices have Wi-Fi connections, the camera can communicate
with the corresponding devices via Bluetooth. The mutual registration process that allows the devices
(the camera and corresponding device) to communicate with each other via Bluetooth is called
"pairing." Once pairing is complete, these devices can automatically communicate via Bluetooth when
they are connected again.
Press the MENU button.
1
Press the UP button or DOWN button to select
2
(Bluetooth setting) - setting value, then press the REC/ENTER button.
(Bluetooth communication enabled.
(No Bluetooth communication. Bluetooth icon does not appear on the screen.)
Pairing with the smartphone
Perform the following operations with the camera and a smartphone that is connected via Wi-Fi.
For connecting the camera to your smartphone, see "Connecting to your smartphone".
Turn on the Bluetooth setting on the smartphone.
1.
Start PlayMemories Mobile application on the smartphone.
2.
Use the application to turn on the remote power function of the camera.
3.
Use the application to select the camera to be connected.
4.
On the application screen that appears, allow pairing for the selected camera.
5.
Check the screen to be displayed and the sound prompting the pairing setting permission of the
6.
Camera settings
on the screen changes to
(Camera Settings) -
or is displayed on the screen.)
.