AEG L6WBN86JW User Manual page 24

24 www.aeg.com
The ProSense System is not
available with all
programmes such as : Wol
and programmes with short
cycles.
10.8 Starting a programme
with the delay start
1. Press the Startuitstel button again
and again until the display shows the
number of minutes or hours of delay.
The related indicator comes on.
2. Press the Start/Pauze button.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press the Start/
Pauze button to start the
appliance, you can cancel or
change the set of the delay
start.
10.9 Cancelling the delay
start
To cancel the delay start:
1. Press the Start/Pauze button to set
the appliance to pause.
The related indicator flashes.
2. Press the Startuitstel button
repeatedly until the display shows .
3. Press the Start/Pauze button again to
start the programme immediately.
10.10 Interrupting a
programme and changing a
option
You can change only some options
before they operate.
1. Press the Start/Pauze button.
The related indicator flashes.
2. Change the option set.
3. Press the Start/Pauze button again.
The programme continues.
10.11 Cancelling a running
programme
1. Press the Aan/Uit button to cancel
the programme and to deactivate the
appliance.
2. Press the Aan/Uit button again to
activate the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.12 Opening the door
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
While a programme or the delay start
operates, the appliance door is locked.
1. Press the Start/Pauze button .
In the display the related door lock
indicator goes off.
2. Open the appliance door.
3. Close the door and press the Start/
Pauze button .
The programme or the delay start
continues.
10.13 End of cycle
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates.
In the display comes on and the door
locked indicator
The indicator of the Start/Pauze button
goes off.
1. Press the Aan/Uit button to
deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
goes off.