Advertisement
Page 6 • JL Audio, Inc., 2017
S T E P 17
Remove the 10mm bolt from the front of the
lower console.
Repeat for the passenger side.
S T E P 18
Slide the center console backward.
Pictured is the factory subwoofer enclosure.
For vehicles without a factory subwoofer, skip
to Step 22.
S T E P 19
Disconnect the wiring harness from the factory
subwoofer enclosure.
S T E P 2 0
Remove the three 10mm nuts securing the
factory subwoofer enclosure to the floor. These
will not be reinstalled.
SB-GM-4GSUVCNSL/10TW1 INSTR_SKU# 011490
S T E P 21
Remove the factory subwoofer enclosure from
the vehicle.
S T E P 22
Place the Stealthbox® into the vehicle between
the front seats with the subwoofer facing down
and the side with the barrier strip to the front.
Connect speaker cable to the barrier strip on
the front of the enclosure, and route the cable
as necessary.
S T E P 2 3
Position the Stealthbox® in the vehicle as
shown. The enclosure should be centered and
slid forward, allowing the recesses in the
enclosure to fit the contours of the floor.
No mounting hardware is required, as the
enclosure will be secured once the center
console is reinstalled.
S T E P 24
Slide the center console back into position, and
connect the lower console wiring harnesses.
Reinstall the two 10mm bolts in the front of the
lower console.
Continued on Next Page
Advertisement
