LG CineBeam PH510PG Owner's Manual page 34

34
Focus of the Screen Image
When an image appears on the screen, check if it is in focus and fits the
screen properly.
Adjust the focus of the image by rotating the Focus Ring to the left or right.
Make sure the product does not move when adjusting the focus.
Watching With the Projector
1
When in standby mode, press the POWER button to turn the projector
on.
2
Press the INPUT button and select the input signal you want.
3
Control the projector using the following buttons while watching
projector.
Button
VOLUME +, -
MUTE
Q.MENU
RATIO
KEY.S ▲, ▼
4
To turn the projector off, press the POWER button.
Adjusts the volume level.
Mutes all sounds.
Accesses the quick menu.
Resizes an image.
Adjusts Keystone.
Focus Ring
Description