Table of Contents
Advertisement
USB
You can play music files located on USB storage devices through the SoundStand.
USB port
1. Connect the USB device to the USB port on the
back of the product.
2. Press the SOURCE button on the remote
control or the (
) button on the product's top
panel repeatedly until USB appears.
3. USB appears on the display screen.
The SoundStand connection to the USB
●
device is complete.
The SoundStand automatically turns off (Auto
●
Power Off) if no USB device has been
connected for more than 25 minutes.
▶ Before you connect a USB device
Be aware of the following:
If the file name of a file or folder on a USB device
●
exceeds 10 characters, it is not displayed on the
SoundStand's display.
This product may not be compatible with certain
●
types of USB storage media.
The SoundStand supports the FAT16 and FAT32
●
file systems.
-
The NTFS file system is not supported.
Connect USB devices directly to the USB port of
●
the product. Otherwise, you may encounter a
USB compatibility problem.
Do not connect multiple storage devices to the
●
product via a multi-card reader. It may not
operate properly.
Digital camera PTP protocols are not supported.
●
Do not remove the USB device while it is being
●
read.
DRM-protected music files (MP3, WMA) from a
●
commercial web site cannot be played.
External HDDs are not supported.
●
Mobile phone devices are not supported.
●
File Format Type Compatibility list:
●
Format
MPEG 1 Layer2
MPEG 1 Layer3
*.mp3
MPEG 2 Layer3
MPEG 2.5 Layer3
Wave_Format_
MSAudio1
*.wma
Wave_Format_
MSAudio2
*.aac
*.wav
*.ogg
OGG 1.1.0
FLAC 1.1.0,
*.flac
FLAC 1.2.1
17
FUNCTIONS
Display
Codec
Sampling Rate
16KHz ~ 48KHz
AAC
16KHz ~ 96KHz
AAC-LC
HE-AAC
24KHz ~ 96KHz
-
16KHz ~ 48KHz
16KHz ~ 96KHz
Advertisement
Table of Contents
