Related Manuals for LG SIGNATURE OLED77G6 Series
Summary of Contents for LG SIGNATURE OLED77G6 Series
- Page 1 OLED TV OLED65G6* OLED77G6* CR2032 OLED65G6* (M4 X L10) (M10 X L70) OLED77G6* X 18 (M8 X L77) (M8 X L25) (M4 X L12) P/No: MFL69387422 (1607-REV01) www.lg.com Printed in Korea...
- Page 3 OLED65G6*...
- Page 4 OLED77G6*...
- Page 5 OLED77G6*...
- Page 6 ANTENNA / CABLE IN HDMI IN HDMI IN/ARC USB IN AUDIO OUT/ H/P OUT...
- Page 7 AUDIO OUT/ H/P OUT Satellite IN OPTICAL DIGITAL AUDIO OUT : Depending on model / Selon le modèle / Dependendo do modelo /...
- Page 8 AV IN COMPONENT IN VIDEO L/MONO AUDIO R AUDIO VIDEO...
- Page 9 : Depending on model / Selon le modèle / Dependendo do modelo /...
- Page 11 OLED65G6V-T 1461 31.7 OLED65G6T-T OLED65G6Y-T OLED77G6V-T 1734 1055 1067 54.1 OLED77G6T-T OLED77G6Y-T...
- Page 13 Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL69361156* P/NO : MFL69361156 (1607-REV00) Printed in Korea...
-
Page 14: Safety Instructions
Safety instructions Please read these safety precautions carefully before using the product. WARNING Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. Do not place the TV and/or remote control in the following environments: Insert power cable plug completely into wall socket otherwise if not... - Page 15 Do not plug too many electrical devices into a single multiple electrical Do not insert any metal objects/conductors (like a metal chopstick/ outlet. Otherwise, this may result in fire due to over-heating. cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall.
- Page 16 It may cause a fire or a burn by a spark. Only use an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction or product deformation. Do not disassemble, repair or modify the product at your own discretion.
- Page 17 CAUTION When installing the antenna, consult with a qualified service technician. If not installed by a qualified technician, this may create a Install the product where no radio wave occurs. fire hazard or an electric shock hazard. There should be enough distance between an outside antenna and We recommend that you maintain a distance of at least 2 to 7 times power lines to keep the former from touching the latter even when the the diagonal screen size when watching TV.
- Page 18 Signal from Remote Control can be interrupted due to external/internal Take care not to touch the ventilation openings when watching the TV lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting for long periods as the ventilation openings may become hot. This does or darken viewing area.
- Page 19 Avoid touching the screen or holding your finger(s) against it for long When moving or unpacking the product, work in pairs because the periods of time. Doing so may produce some temporary or permanent product is heavy. Otherwise, this may result in injury. distortion/damage to screen.
-
Page 20: Viewing 3D Imaging (Only 3D Models)
In this case, stop watching the 3D video and take a rest. • Only use LG 3D glasses. Otherwise, you may not be able to view 3D Some horizontal lines may appear when the Clear Panel Noise feature is videos properly. -
Page 21: Separate Purchase
• If you do not use a certified HDMI cable, the screen may not display AG-F*** AN-TD700 or a connection error may occur. (Recommended HDMI Cable Types) Cinema 3D Glasses LG Twin TV Engine - High-Speed HDMI cable (3 m or less) ® AN-VC550... -
Page 22: Mounting On A Table
Basic functions • When transporting a large TV, there should be at least 2 people. • When transporting the TV by hand, hold the TV as shown in the following illustration. Power On (Press) Power Off (Press and hold) Volume Control • ... -
Page 23: Mounting On A Wall
We recommend the use • Only using furniture that can safely support the television. of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with • Ensuring the television is not overhanging the edge of the cables connected. -
Page 24: Connections (Notifications)
CAUTION Provided item • Fold the AV box or remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. • To install the wall mount, switch the selector to WALL TYPE as AV box fixing supporter / shown in the figure below. -
Page 25: Other Connections
Other connections • In PC mode, some resolution settings may not work properly depending on the graphics card. Connect your TV to external devices. For the best picture and audio • If ULTRA HD content is played on your PC, video or audio may quality, connect the external device and the TV with the HDMI cable. -
Page 26: Battery Installation
Battery installation WARNING DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD. CAUTION • The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, incinerate, or heat above 100 °C. Replace the battery part no. CR2032 only. Use of another battery may present a risk of fire or explosion. - Page 27 (HOME) Accesses the Home menu. (POWER) Turns the TV on or off. Shows the previous history. You can turn your set-top box on or off by adding the set- Displays the set-top box Home menu. top box to the universal remote control for your TV. * When you are not watching via a set-top box: the display changes Number buttons Enters numbers.
-
Page 28: Open Source Software Notice Information
: Yellow, : Blue) disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM Registering magic remote for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to How to register the magic remote opensource@lge.com. -
Page 29: Troubleshooting
Troubleshooting Specifications Cannot control the TV with the remote control. Wireless module specification • Check the remote control sensor on the product and try again. • As band channels can vary per country, the user cannot change or • Check if there is any obstacle between the product and the remote adjust the operating frequency. - Page 30 CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating 0 °C to 40 °C Temperature Operating Less than 80 % Humidity Environment condition Storage -20 °C to 60 °C Temperature Storage Less than 85 % Humidity 1 Only Satellite models.
- Page 31 Regulatory WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the television set. • ...
- Page 32 0800 545454 in South Africa quote this information to your dealer when 080 100 54 54 in Morocco requiring any service. 19960 in Egypt 021 36 54 54 in Algeria MODEL Other countries, Please contact our local dealer or log into SERIAL http://www.lg.com...
-
Page 33: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... -
Page 34: Key Codes
KEY CODES key CODeS • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button... - Page 35 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
- Page 36 (TV) (PC) EXTERNAL CONTROL DEVICE SETUP (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
-
Page 37: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA... -
Page 38: Transmission / Receiving Protocol
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. - Page 39 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
- Page 40 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
- Page 41 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
- Page 42 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
- Page 43 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
- Page 44 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x]...