Haier ESAQ406TZ Owner’s Manual And Installation Instruction page 6

CONTROLS
elay
3. D
Delay ON—When the air conditioner is off, it can be set
to automatically come on in 1 to 24 hours at its previous
mode and fan settings.
Delay OFF—When the air conditioner is on,
it can be set to automatically turn off in 1 to
24 hours.
How to set:
Press the Delay 1–24hr pad on the unit or the remote
control. Each touch of the Increase
the unit or the remote control will set the timer in 1-hour
intervals.
To review the remaining time on the Delay 1–24hr timer,
press the Delay 1–24hr pad on the unit or the remote
control. Use the Increase
or on the remote control to set a new time if desired.
To cancel the timer, press Decrease
or the remote control until the set time is zero. After 3
seconds the light on the Delay 1-24 hour pad goes off.
6
^ v
/ Decrease pads on
^ v
/ Decrease pads on the unit
v
pad on the unit
4. TEMP/TIME
1. Press the TEMP/TIME
Each time you press the TEMP/TIME ^ button, the
temperature will go up by 1° F until it reaches 86° F (30° C).
2. Press the TEMP/TIME
Each time you press the TEMP/TIME v button, the
temperature will go down by 1° F until it reaches 61° F (16°
C).
NOTE: Under Fan mode, the display will show the current
temperature. Under Energy Save, Cool or Dehum mode, the
display will show the set temperature.
5. FILTER RESET
This feature automatically notifies you that the air filter must
be cleaned. The indicator light will come on after 240 hours
of operation. Clean the air filter (refer to Care and Cleaning
section), place it back in the front panel, and press the Filter
Reset button. The light will turn off.
6. WiFi Connect
Enables connection of the air conditioner to hte home WiFi.
Download App for details at:
haierappliances.com
^
button to raise the temperature.
v
button to lower the temperature.
49-5000454 Rev. 1