Maintenance; Replacing An Oven Light - Bosch HGS5053UC Use And Care Manual

Maintenance

Replacing an Oven Light

CAUTION:
• Make sure the appliance and lights are
cool and power to the appliance has been
turned off before replacing the light
bulb(s). Failure to do so could result in
electrical shock or burns. Wear a leather-
faced glove for protection against
possible broken glass.
The light bulb is located at the rear of the oven and is
covered with a glass shield held by a wire holder. The glass
shield must be in place whenever the oven is in use.
To replace the oven light bulb:
1. Turn electrical power off at the main source or unplug
the range.
2. Press wire holder to one side to release the glass
shield.
3. Replace bulb with a new 40 watt appliance bulb.
4. Replace glass shield over bulb and snap wire holder
into place.
5. Turn power back on again at the main source (or plug
in the range back in).
6. The clock will then need to be reset. To reset, see
Setting the Clock and Minute Timer in this Use and
Care Guide.
English 22