Charging The Battery; Wireless Charging - Samsung SM-R890 User Manual

Getting Started

Charging the battery

Charge the battery before using it for the first time or when it has been unused for extended
periods.
Use only Samsung-approved charger and cable specifically designed for your Watch.
Incompatible charger and cable can cause serious injuries or damage to your device.
• Use only wireless charger supplied with the device. The Watch cannot be charged
properly with a third-party wireless charger.
• Connecting the charger improperly may cause serious damage to the device. Any
damage caused by misuse is not covered by the warranty.
• To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and easily accessible while charging.
• The Watch has a built-in wireless charging coil. You can charge the battery by using
a wireless charging pad. The wireless charging pad is sold separately. For more
information about available wireless charging pads, refer to the Samsung website.

Wireless charging

1
Connect the wireless charger to the USB power adaptor.
2
Place the Watch on the wireless charger aligning the centre of your Watch's back side with
the centre of the wireless charger.
3
After fully charging, disconnect the Watch from the wireless charger.
Wireless charger
16