Date/Time Settings; Viewfinder Adjustment; Brightness Adjustment Of The Display; Tripod Mounting - JVC GR-D750AS Instructions Manual

14 GETTING STARTED
EN

Date/Time Settings

1
Select
2
SET
The date/time is recorded onto the tape at all
times, but its display can be turned on or off.
( pg. 24, 25)
Perform steps 1 – 3 in "Language Settings"
( pg. 13).
1
Select "DISPLAY", press SET or
2
Select "CLOCK ADJ.", press SET or
3
Select the desired date display format,
press SET or .
2
● Repeat this step to input time display format
(Select from "24h" or "12h"), month, date, year,
hour and minutes.
4
Press MENU.
Press 1 whenever you want to return to the
previous menu screen/setting.
Viewfinder Adjustment
1
Set the Power Switch to "REC" while
pressing down the Lock Button located on the
switch.
2
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully.
3
Turn the Dioptre Adjustment Control until
the indications in the viewfinder are clearly
focused.
Example:
Dioptre Adjustment Control
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
CLOCK ADJ.
YEAR. MONTH. DATE 24h
2007 1 6
14 : 10
.
2
.
2
Brightness Adjustment Of The
Display
1
Select
2
SET
Perform steps 1 – 3 in "Language Settings"
( pg. 13).
● To adjust the brightness of the viewfinder,
pull out the viewfinder fully and set
"PRIORITY" to "FINDER" (
1
Select "DISPLAY", press SET or
2
Select "BRIGHT", press SET or
3
Select the appropriate brightness, press
SET or .
2
4
Press MENU.
Press 1 whenever you want to return to the
previous menu screen.

Tripod Mounting

To attach the
camcorder to a tripod,
align the direction stud
and screw to the
mounting socket and
stud hole on the
camcorder. Then
tighten the screw
clockwise.
● Some tripods are not
equipped with studs.
pg. 24).
.
2
.
2