Table of Contents
Advertisement
en
Appliance door
Attaching the rails
The rails only fit on the right or the left side. For both
rails, ensure that the curved rods are at the front.
First, insert the rail in the middle of the rear socket
1.
until the rail rests against the cooking compartment
wall, and push it back
Then insert the rail into the front socket
2.
rail also rests against the cooking compartment wall
here, and press it downwards
30
ƒ
(figure
).
!
„
, until the
...
(figure
).
"
qAppliance door
W ith good care and cleaning, your appliance will retain
A p p l i a n c e d o o r
‚
,
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Detaching and refitting the appliance door
For cleaning purposes or to remove the door panels,
you can detach the appliance door.
The appliance door hinges each have a locking lever.
When the locking levers are closed (fig.
appliance door is secured in place. It cannot be
detached.
When the locking levers are open in order to detach the
appliance door (fig.
cannot snap shut.
:
Warning
Risk of injury!
If the hinges are not locked, they can snap shut with
■
great force. Ensure that the locking levers are always
fully closed or, when detaching the appliance door,
fully open.
The hinges on the appliance door move when
Risk of injury!
■
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Detaching the appliance door
Open the appliance door fully.
1.
Open the two locking levers on the left and right
2.
(fig.
).
!
Close the appliance door fully
3.
appliance door with both hands, one on the left and
one on the right
), the
!
), the hinges are locked. They
"
‚
. Take hold of the
ƒ
, and pull it up and out (fig.
).
"
Advertisement
Table of Contents
