Connecting The Soundbar; Connecting Electrical Power; How To Mount The Ac/Dc Adapter - Samsung HW-LST70T/XY Full Manual

04 CONNECTING THE SOUNDBAR

Connecting Electrical Power

Connect the Soundbar to an electrical outlet in the
following order:
1. Connect the AC/DC adapter to the Soundbar.
2. Connect the power cord to a wall socket.
• For more information about the required
electrical power and power consumption,
refer to the label attached to the product.
(Label: Bottom of the Soundbar Main Unit)
NOTES
• If you unplug and reconnect the power
cord when the product is turned on, the
Soundbar turns on automatically.
• Never forcibly pull the power cord of AC/
DC adapter.
• When installing the AC/DC adapter
horizontally, place it with the Samsung
logo facing upward.
• This product may not operate safely under
-20°C. It is recommended to connect the
power cable to the outlet and after 1 hour,
turn on the Soundbar power.
AC/DC Adapter
Rear of the Soundbar Main Unit
• While the cable is not in use, seal it with
waterproof silicone.
DIGITAL
AUDIO IN
(OPTICAL)
SERVICE
DC 23V
DIGITAL
AUDIO IN
(OPTICAL)
SERVICE
DC 23V
How to mount the AC/DC
adapter
• Tighten 2 or 4 screws (not supplied) on the
wall or table and then insert them into the
grooves on the rear of the AC/DC adapter.
You cannot install the adapter directly on
the floor.
• For the mounting screws, see the following
figures.
Recommended Screw specification
6.5 mm
ENG - 15
(not supplied)
L12
4.5 mm
M3