Table of Contents

Advertisement

14
www.aeg.com
2. Connect the wire coloured blue to
the terminal either marked with the
letter "N" or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the
"L" or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp
(E) is secure over the outer sheath.
Make sure the electricity supply
voltage is the same as that indicated
on the appliance rating plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp
fuse (B). In the event of having to change
the fuse in the plug supplied, a 13 amp
ASTA approved (BS 1362) fuse must be
used.
WARNING!
A cut off plug inserted into a
13 amp socket is a serious
safety (shock) hazard. Ensure
that it is disposed of safely.

9. NOISES

There are some sounds during normal running (compressor, refrigerant circulation).
OK
SSSRRR!
8.4 Ventilation requirements
The airflow behind the appliance must
be sufficient.
SSSRRR!
min.
5 cm
2
200 cm
CAUTION!
Refer to the assembly
instructions for the
installation.
HISSS!
min.
200 cm
2
BRRR
!

Advertisement

Table of Contents
loading

Table of Contents