Table of Contents
Advertisement
Menu Option
LAN Control Settings
Light Source Settings
Reset Settings
Description
LAN Settings
ͫ DHCP ON: Select this if you are in a DHCP environment
and Projector IP Address,
DNS Server settings will be automatically retrieved.
ͫ Static IP: Select this if you are in a non-DHCP environment
and make adjustments to below settings.
Projector IP Address
Subnet Mask
Default Gateway
DNS Server
Standby LAN Control
Allows the projector to provide the network function in
standby mode.
Apply
Enacts the settings.
Light Source Mode
ͫ Normal: Provides full light source brightness.
ͫ Eco: Reduces light source power consumption by 20%
and lowers brightness to extend the light source life and
decreases the fan noise.
ͫ Dynamic Black 1: Reduces light source power
consumption by up to 70% depending on the content
brightness level.
ͫ Dynamic Black 2: Reduces light source power
consumption by up to 50% depending on the content
brightness level.
Reset Light Source Hours
Resets the light source timer after a new light source is
installed. For changing the light source, please contact qualified
service personnel.
Light Source Hours Information
ͫ Light Source Usage Time: Displays the number of hours
the light source has been used.
Returns all settings to the factory preset values. When
using Reset Settings, the following settings will still remain:
Zoom, Keystone, Language, Projector Position, USB A Power,
High Altitude Mode, Security Settings, Remote Control Code,
Control Method, and Baud Rate.
58
Subnet Mask, Default Gateway,
Only available when LAN Settings is
set to Static IP. Use
column and use
value.
/
to select a
/
to adjust the
Advertisement
Table of Contents
