LG 32LM550BPLB.AEU Owner's Manual page 11

Fine-tuning Picture Mode
(Settings) → [Picture] → [Picture Mode Settings]
This feature allows you to adjust the selected picture mode in detail.
• [Backlight] : Controls the level of screen brightness by adjusting the
backlight. The closer to 100, the brighter the screen.
• [Contrast] : Adjusts the contrast of the bright and dark areas of the
picture. The closer to 100, the higher the contrast.
• [Brightness] : Adjusts the overall screen brightness. The closer to
100, the brighter the screen.
• [Sharpness] : Adjusts the sharpness of the image. The closer to 50,
the sharper and clearer the image.
• [Colour] : Tones down or up the colours displayed on the screen. The
closer to 100, the deeper the colour.
• [Tint] : Adjusts the colour balance between red and green displayed
on the screen. The closer to Red 50, the more red the colour will be.
The closer to Green 50, the more green the colour will be.
• [Colour Temperature] : Adjusts the colour temperature from cold
to warm.
• Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
To set advanced controls
(Settings) → [Picture] → [Picture Mode Settings] → [Advanced
Controls] / [Expert Controls]
Calibrates the screen for each picture mode; or adjusts picture settings
for a special screen.
• [Dynamic Contrast] : Adjusts the contrast to the optimal level
according to the brightness of the image.
• [Dynamic Colour] : Adjusts colours to make the image appear in
more natural colours.
• [Preferred Colour] : Adjust the colours of skin, grass and sky to your
personal preferences.
• [Gamma] : Sets the gradation curve according to the output of
picture signal in relation to the input signal.
• [Colour Gamut] : Selects the range of colours that can be expressed.
• [Colour Filter] : Filters a specific colour spectrum in RGB colours to
fine-tune colour saturation and hue accurately.
• [White Balance] : Adjusts the overall tone of the screen as desired.
• [Colour Management System] : This is a system that experts use
when they adjust colour with a test pattern. They can select from
six colour areas (Red / Green / Blue / Cyan / Magenta / Yellow)
without affecting other colours. For normal images, adjustments
may not result in noticeable colour changes.
• Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
11