Table of Contents
Advertisement
Removal steps of the wireless-WAN card
Step
Screw (quantity)
3
M2 × 3 mm, flat-head, nylon-coated (1)
When installing:
Plug the orange cable into the connector labeled MAIN on the card, and plug the blue cable into the
connector labeled AUX on the card. If a green cable comes with your computer, plug the cable into the
connector with the silkscreen GPS.
1070 Wireless-LAN module or WiGig module
Note: Before you start the servicing, disable the built-in battery. See "Disabling the built-in battery" on page
68.
For access, remove these FRUs in order:
• "1010 Removable battery" on page 68
• "1030 Base cover assembly" on page 69
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 9
Removing or replacing a FRU
77
Advertisement
Table of Contents
