Table of Contents
Advertisement
Reset Your Light Strip
There are two types of reset available: a
soft reset
which resets the Wi-Fi settings only, and a
factory reset
that erases all of your custom settings and
restore them to factory defaults.
Soft Reset (without losing the configuration settings except Wi-Fi)
Press and hold the button on your controller for more than 5 seconds but no more than 10 seconds and release. The light strip animating orange and
green after that indicates a successful soft reset. Then you can reconfigure your light strip in Tapo app.
Factory Reset (back to factory default settings)
Method 1
Press and hold the button on the controller for at least10 seconds until the light strip turns solid white then blinks orange and green. Then you can
reconfigure your light strip in Tapo app.
Method 2
OR
On the home page in Tapo app, long press the card and tap Remove.
Go to
Device Settings
page and tap
REMOVE
at the bottom.
20
Advertisement
Table of Contents
