Craftsman CMXPTSG1007NB Instruction Manual page 9

ENGLISH
3. Place 2 – 3 drops of air tool oil (not
included) into the opening of the male
air plug before each use.
4. Select the correct impact socket (not
included) and mount it onto the
anvil 2 until it clicks into place.
WARNING: Use only adapters and
sockets with a torque rating equal to
or greater than the tool itself. Always
make sure adapters and sockets are
properly mounted and secure before
using the tool. Loose attachments
can break or fly off, causing serious
injury to the operator or bystanders
in the work area. Always follow all
manufacturers' specifications for
proper attachment and use.
5. Connect air supply hose to the male
plug. Set the working pressure at 90 PSI
for best tool performance.
8
2