Table of Contents
Advertisement
Child Lock (
)
Select this function to lock the buttons on the control
assembly to prevent tampering.
Locking the control panel
1
Press and hold the Child Lock button for 3
seconds.
2
A beeper will sound, and '
display.
When the child lock is set, all buttons are locked
except the power button.
NoTE
• Turning off the power will not reset the child lock
function. You must deactivate child lock before
you can access any other functions.
unlocking the control panel
Press and hold the Child Lock button for 3 seconds.
• A beeper will sound and the remaining time for the
current programme will reappear on the display.
Beep on / off
1
Press the power button.
2
Press the Start/pause button.
3
Press and hold the Steam and pre Wash button
simultaneously for 3 seconds to set the Beep on/off
function.
NoTE
• Once the Beep on/off function is set, the setting is
memorized even after the power is turned off.
• If you want to turn the Beeper off, simply repeat
this process.
28
' will appear on the
Add Item
Laundry can be added or removed after the washing
programme is started.
1
Press the Start/pause button.
2
Open the door after door lock is released.
3
Add or remove laundry.
4
Press the Start/pause button again to continue the
cycle.
The cycle continues automatically.
NoTE
• For safety reasons, the door remains locked when
the water level or temperature is high.
Because of the reasons mentioned above,
the door remains locked at a few washing
programmes.
• It is not possible to add laundry during this time.
Advertisement
Table of Contents
